POLYKEN980 Inner Wrap Tape For Gas Pipeline
Basic Info
Model No.: Polyken980
Product Description
Description
The inner wrap tape shall be two ply plastic tape consisting of stabilized polyethylene (PE) base of outer
layer (backing) with a layer of butyl rubber (adhesive) applied on one side. Inner Wrap Tape For Gas Pipeline
also called Anti corrosion Inner Wrap Tape,Polyken980 Anti-corrosion Tape,Pipeline Inner Tape.POLYKEN980
Inner Wrap Tape For Pipeline thickness of plastic base shall not be less than 13mils. Thickness of butyl rubber
shall not be less than 12 mils. The total thickness of the tape shall not be less than 25 mils. The inner wrap
tape must be compatible with the properties of the primer and the properties of outer wrap tape.
Specifications
Backing : Special blend of stabilized polyethylene
Adhesive : Butyl rubber and Adhesion Promoting Resins
Total tape thickness in mils:15mils(0.381mm),20mils(0.508mm),25mils(0.635mm),30mils(0.762mm)
Tape width in inches:2"(50mm),4"(100mm),6"(150mm),9"(228mm),12"(305mm)18" (457mm)
Tape roll length in feet:100ft(30M),200ft(61M),400ft(122M),600ft(183M),800ft(244M)
Product Properties Test method Typical Value POLYKEN980-15 POLYKEN980-20 POLYKEN980-25 POLYKEN980-30 Total Thickness 15mil(0.381mm) 20mil(0.508mm) 25mil(0.635mm) 30mil(0.762mm) Backing of PE film 9 mils(0.229 mm) 12mil(0.305mm) 13mil(0.330mm) 10mil(0.254mm) Butyl Rubber Adhesive 6 mils(0.152 mm) 8mil(0.203mm) 12mil(0.305mm) 20mil(0.508mm) Tensile Strength ASTM D1000 40 N/cm 55 N/cm 62 N/cm 70 N/cm Elongation ASTM D1000 300% 330% 350% 400% Peel Adhesion to Primed Steel ASTM D1000 24.5 N/cm 25 N/cm 26.5 N/cm 30 N/cm Water Vapor Transmission Rate ASTM E 96 0.10g/m2 0.10g/m2 0.09g/m2 0.08g/m2 Water absorption after 1 day,At+23℃ ASTM D570 0.10% 0.10% 0. 08% 0. 06% Volume Resistivity ASTM D 257 2.0 x 1015 ohm.cm 2.5 x 1015 ohm.cm 2.5 x 1015 ohm.cm 2.5 x 1015 ohm.cm Dielectric Strength ASTM D149 30 kV 35 kV 42kv 43kv
Production Image
Other Product Recommendations
Double-side wrap tape,Outer wrap tape,PP wrap tape,Polyethylene Heat Shrinkage tape
Product Categories : Polyken Pipe Coating System > Polyken 980 (Inner Wrap)